1: What is the status of LTO Generation 4?

The availability of the Generation 4 specifications was announced in January 2007 and it is anticipated that products will become available throughout 2007.

2: Why is encryption being offered on the LTO Ultrium generation 4 tape drive specification?

Protection of customer information is a significant business issue. Losing a consumer's information can be very expensive from an actual cost recovery and public relations perspective. Encrypting data helps protect customer's information from many types of compromise. The LTO Ultrium Generation 4 tape drive encryption can help address this need.

3: What method of encryption will be used in Generation 4 tape drives?

LTO Generation 4 uses "AES encryption algorithm, with 256-bit keys, in GCM mode." A shorter way to say it is "256-bit AES in GCM mode" or "AES256-GCM."

The Advanced Encryption Standard with Galois/Counter Mode of Operation (AES+GCM) is a block cipher that provides authenticated encryption that can achieve very high speeds in hardware with low cost and low latency. It helps provide both data confidentiality and data integrity in a single, easy to use construct.

4: What standards will LTO encryption comply with or utilize?

LTO encryption complies with and/or utilizes The Galois/Counter Mode of Operation (GCM), Advanced Encryption Standard (AES), IEEE SPC-4 SCSI Primary Commands, IEEE SSC-3 SCSI Stream Commands and IEEE P1619.1^TM/D13, Draft Standard for Authenticated Encryption with Length Expansion for Storage Devices.

5: Will a special cartridge be required?

Generation 4 standard or WORM tape data cartridge are required for encryption.

6: Will encryption adversely affect drive performance?

No, it should not. The impact of hardware encryption on tape drive performance is expected to be typically less than 1%. LTO Generation 4 encrypting tape drives will use GCM for encryption/authentication, and this will allow the drives to achieve high performance, though it will be up to each individual tape drive vendor to select its specific GCM implementation.

7: Will encryption be offered on every Generation 4 tape drive?

While encryption capabilities are defined in the Generation 4 specification, encryption is an optional feature that LTO vendors can include or not include, based on their individual product lines.

8: What will users have to do to utilize LTO encryption?

Users will enable encryption/decryption on the encrypting Generation 4 tape drive and provide a key.

The Generation 4 specification states that LTO Generation 4 drives support the SCSI Security Protocol commands, which may be used to enable encryption, and provide a key to the drive. Some vendor implementations may enable encryption and provide a key through a proprietary channel.

9: What happens when I insert a tape cartridge encrypted on a Generation 4 drive into a drive that does not encrypt or decrypt?

The drive specification is designed to know how to handle the cartridge, and eject the cartridge.

10: How will encryption and the keys be implemented?

Encryption is performed in-hardware. Keys are presented to the drive from an external key management system.

11: Will Generation 4 drives offer encryption key management?

Key management is not part of the LTO Ultrium Generation 4 specification. However, the Generation 4 format has been designed to work with third party key management software and it is expected that key management systems will be provided by a variety of sources that could include LTO licensees, tape automation providers, and independent software vendors.

12: Will the whole cartridge be encrypted or can only certain records/files on a cart be encrypted?

The LTO specifications do not limit this capability. Depending on the key management system and application an intermix of encrypted and unencrypted records may be stored on the same cartridge.

13: What happens if a Generation 4 encrypted cart is put in a lower generation drive (LTO-3, LTO-2 or LTO-1)?

An earlier generation drive is designed to reject an attempt to access a Generation 4 cartridge.

14: What happens if a Generation 4 encrypted cart is put in a non-encrypting Generation 4 drive?

If a Generation 4 drive without hardware encryption option tries to read encrypted portions of a cartridge, it will report that the data is encrypted.

15: Could a Generation 4 drive encrypt to a Generation 3 cartridge?

No.

16: What are the benefits of encrypting data at the drive level vs. using an appliance in the network or software encryption?

Encrypting at the tape drive level can provide performance and capacity advantages for administrators. Encryption at the tape drive level enables compression before encryption, maximizing tape capacities, and allows high performance during backup. Encrypting using an appliance device in the network can create latencies that affect backup performance, and requires management of the additional device. Encrypting data at tape speed helps to avoid the need for host-based encryption of data — and the concurrent drain on host performance.

17: Will encryption cost more?

Although Generation 4 tape drives with advanced functionality, such as encryption, can return value to business, individual tape drive vendors establish their own product prices.

18: Why does it make sense for users to select their own key management system?

As an open, standards-based format, LTO Generation 4 has been designed to work with standard third party software allowing organizations to choose best of breed solutions with the vendor of their choice.

19: How will LTO encryption affect LTO cartridge interchange compatibility?

LTO cartridge interchange remains unchanged. That is, an encrypted cartridge on one vendor's drive can be read on another vendor's drive given that the drive is a compatible generation, an encryption capable drive and is provided the correct encryption key. The administration of the encryption keys is typically handled by software which is outside the scope of the LTO Ultrium format specification. Encryption management software could be a factor in the interchange of an encrypted tape cartridge and should be taken into consideration when planning for encrypted cartridge interchange. Drives from different vendors that use the same software infrastructure should be interchange compatible.  Drives in different locations may need compatible key management software or other less automated methods at each location to foster cartridge interchange.  Please contact your system provider for more information.

20: What is the status of LTO Technology generations beyond Generation 4?

In 1998, the LTO Program took great pains to establish a credible roadmap consisting of four generations. IT and storage managers have come to rely on the roadmap for decision-making. As such, the LTO Program conducted extensive end user, analyst and tape storage trend research to update the roadmap beyond generation four.

In December 2004, the LTO Program announced an update to the LTO Ultrium format roadmap to include generations 5 and 6 with a performance update to generation 4.

The updated roadmap calls for the following capacity and performance figures:

Generation 5
Capacity: 3.2 TB (assuming a 2:1 compression)
Data transfer speed: up to 360 MB/s (assuming a 2:1 compression)

Generation 6
Capacity: 6.4 TB (assuming a 2:1 compression)
Data transfer speed: up to 540 MB/s (assuming a 2:1 compression)

21: How will the LTO program achieve the higher capacity and data transfer speeds?

The TPCs will continue to research and implement state-of-the-art technological advancements that impact reliability, capacities and transfer rates. These advancements leverage key tape drive attributes including media type, encoding scheme, tape speed, tape length, linear density, and areal density-data tracks.

22: Does the LTO Program offer Write Once, Read Many (WORM) technology?

Yes. On October 25, 2004, the LTO Program announced the availability of an enhancement to the LTO Ultrium format Generation 3 specification that provides LTO technology manufacturers with the opportunity to offer Write Once, Read Many (WORM) functionality for LTO Ultrium format beginning with Generation 3.

23: What is the Ultrium format?

The Ultrium tape format specification is the implementation of LTO (Linear Tape-Open) Technology optimized for high capacity and performance with outstanding reliability, in either a stand-alone or an automated environment. The Ultrium format uses a single-reel tape cartridge to maximize capacity, and it is ideally suited for backup, restore and archive applications. It is our intent that the Ultrium tape format will meet the needs of the single server user and complex multiple server enterprise environment with a roadmap, or migration path, which extends well into the next decade. The Ultrium tape format establishes a new benchmark for large volume backup and archive.

24: When did products based on the Ultrium format Generation 3 become available, and how are they priced?

Ultrium format Generation 3 products are available now. Product specific questions should be directed to individual companies sourcing those products. Please revisit the LTO Program website at www.ultrium.com/newsite/html/licensing_part.html for updated information on LTO licensed companies from whom specific product information can be expected.

25: What are the key differences between Ultrium format Generation 3 and Generation 4?

As stated in the LTO Technology six-generation roadmap, speed and capacity are expected to increase with each generation of the Ultrium format. Ultrium format Generation 4 increases the capacity from 400GB to up to 800GB (uncompressed) using Generation 4 data cartridges. The data transfer peak performance speed increases from up to 160MB/second compressed in the Ultrium format Generation 3 to up to 240 MB/second native in Generation 4.

The Ultrium format Generation 4 provides users with outstanding data and investment protection because of its capability to read-and-write Generation 3 cartridges in the Ultrium Generation 3 format.

In addition, the LTO Ultrium generation 4 includes hardware based tape drive encryption specifications to help users address data security concerns.

26: Are products based on the Ultrium format compatible with any other storage products that exist today?

The underlying premise of the LTO Program was to create a pro-competitive environment that included multiple vendors offering unique feature sets while maintaining data interchange among competing LTO offerings. But LTO-based products are not compatible with non-LTO products.

27: How can users be sure of data interchangeability among Ultrium format products?

The Ultrium format trademark identifies products that are subject to annual third-party compliance verification sample testing to verify that these products comply with the Ultrium tape format specification. This compliance will maximize the likelihood for data interchange of Ultrium tape cartridges between different manufacturers' Ultrium tape mechanisms. Use of this trademark will be granted only after an Ultrium tape format product has passed the compliance verification testing process.

28: What are the backward compatibility characteristics of the Ultrium format?

The LTO Ultrium compatibility is defined with two concepts demonstrating investment protection:
1) An Ultrium drive can read data from a cartridge in its own generation and two prior generations.
2) An Ultrium drive can write data to a cartridge in its own generation and to a cartridge from the immediate prior generation in the prior generation format.

For example:

- An Ultrium format Generation 4 drive will read and write data on an Ultrium format Generation 3 cartridge as specified by the Generation 3 format and read data on an Ultrium format Generation 2 drive.

- An Ultrium format Generation 3 drive will read and write data on an Ultrium format Generation 2 cartridge as specified by the Generation 2 format and read data on an Ultrium format Generation 1 drive

29: What is LTO Technology?

LTO Technology, or Linear Tape-Open Technology, combines the advantages of linear multi-channel bi-directional tape formats in common usage today with enhancements in the areas of timing-based servo, hardware data compression, optimized track layouts and high efficiency error correction code to maximize capacity and performance.

30: What did Hewlett -Packard, IBM and Quantum, contribute to LTO Technology?

HP, IBM and Quantum each provided expert knowledge of customer needs and complementary technology that provided for delivery of a best-of-breed technology and promotes a strong foundation for data interchange. It is the intent of the program that other companies can participate in this tape industry opportunity through the open licensing process.

31: What is the availability of products based on LTO Technology, and how are they priced?

The LTO Program announced the availability of the Generation 4 specification to licensees in January 2007.. Ultrium format Generation 3 products are available now. Ultrium format Generation 2 tape storage products began to appear in the market in late 2002. Typically, products based on each new generation of LTO technology emerge every 18 to 24 months. For specific pricing questions, please contact the individual companies sourcing those products, and be sure to visit the LTO Program website at http://www.ultrium.com/technology/wtb.php for updated information on LTO licensed companies from whom specific product information can be expected.

32: How can manufacturers who wish to develop products based on the Ultrium tape format specification obtain a license?

Specifications and license packages are available for Generation 4,Generation 3 and Generation 2 licenses. Full details can be obtained by contacting the LTO Program through this link:

33: How can I best determine if I should buy a license and which one to buy?

Deciding whether to buy a license and which one is an individual matter. If the Licensing Information available through or this website ( http://www.ultrium.com ) does not provide you with enough information about the format specifications, you may want to consider purchasing a Basic Package. Each of these licenses provides the tape mechanism and the tape cartridge specifications for the applicable format. These Basic Packages are available for a nominal fee. If you are interested in either of these packages, please contact the LTO Program through this link.

34: I have purchased the Ultrium format Generation 3 Basic Package, Ultrium Specification Document (AP-36), and have decided to purchase one of the Enhanced Packages, Ultrium Tape Mechanism License (AP-34) or Ultrium Tape Cartridge License (AP-35). Do I get credit for the license fee paid for the Basic Package against the fee for the Enhanced Package license?

No.

35: I have purchased the Ultrium format Generation 2 Basic Package, Ultrium Specification Document (AP-26), and have decided to purchase one of the Enhanced Packages, Ultrium Tape Mechanism License (AP-24) or Ultrium Tape Cartridge License (AP-25). Do I get credit for the license fee paid for the Basic Package against the fee for the Enhanced Package license?

No.

36: I have purchased the Ultrium format Generation 1 Basic Package, Ultrium Specification Document (AP-6), and have decided to purchase one of the Enhanced Packages, Ultrium Tape Mechanism License (AP-4) or Ultrium Tape Cartridge License (AP-5). Do I get credit for the license fee paid for the Basic Package against the fee for the Enhanced Package license?

No.

37: Does the LTO Program provide specifications for the Accelis format? If not, why?

No. The Accelis concept was developed in 1997 to meet customer demands for fast access to data by using a two-reel cartridge that loads in the middle of the tape to minimize access time. However, because of technological developments that have occurred since it was first developed, coupled with the fact that customers have demonstrated strong satisfaction with the performance and growth of the LTO Ultrium tape format, there has been no significant demand for Accelis. Thus, no licenses are being offered at this time.

38: Why did Hewlett-Packard, IBM and Quantum develop new open tape format specifications?

Customers, OEMs and industry analysts believe that the fragmentation in the tape industry and proliferation of formats and technologies has overly complicated customer-buying decisions. With these issues in mind HP, IBM and Quantum took steps to define a technology that has led to open tape format specifications that can better serve multiple needs for storage and be supported by multiple suppliers.

39: What is an "open tape format specification?"

An open tape format specification is one that is readily available to all potential manufacturers and offers licenses for the IP (Intellectual Property) at a reasonable price. We feel that the Ultrium tape format specification meets these criteria.

40: Why is tape so popular for data protection today? Considering new technologies like DVD-RAM or backup strategies with disk technology, how long will tape be a viable and desirable solution?

Tape remains unrivaled in terms of cost and capacity for data storage, and with its removable and portable attributes, tape should continue to play an increasing crucial role in corporate data protection strategies. No other technology offers the same combined low cost and high capacity advantage of tape. While other technologies may offer strengths in one or more areas, overall, they do not meet the entire set of customer needs that tape addresses. A complementary blend of tape and disk can help customers address a variety of storage goals including performance, compliance, security, data retention and total cost of ownership.

41: How does an open tape format specification ultimately benefit customers?

The end-user customer and OEMs benefit from this open tape format specification approach through the availability of multiple sources of tape mechanisms, multiple sources of tape cartridges and common tape format specifications for interoperability. The competitive environment fostered by multiple sources of product leads to faster paced innovation and enhancements, generally means lower prices and provides for data compatibility. For OEMs, open tape format specifications shorten their qualification cycles and reduce complexities in system configuration.